Nurse Ratched
- Based on the Arduino as ISP sketch
- For replacing the bootloader on a Pro Micro as described here
- Spring loaded pogo pins for quick non-soldered connection to Pro Micro
 |
| Assembled from some protoboards, an Arduino Pro Mini and a USB/Serial adapter. Could have just used another Pro Micro, but I had the parts. |
 |
| The working end. Spring loaded pogo pins soldered in place, spaced to lined up with the pads on the Pro Micro. |
 |
| The controller end with the Pro Mini and serial adapter. The Pro Mini is programmed with the Arduino as ISP sketch. |
 |
| Hooked up and running. Pro Micro powered and programmed through the pogo pin connections. |
