Tiny 8 switch keypad
- Piggybacks onto a Pro Micro
- Tiny 18 x 35mm
- 6mm x 6mm tactile switches
- Simple Arduino sketch
 |
| Socketed Pro Micro. Leads cut from diodes soldered in place. |
 | |
| Pins from switches cut flush to PCB. Kapton tape to insulate the pins from the USB connector. |
 |
| Assembled. Another soldered permanently together using pin headers. |
 |
| Tight fit. |
 |
| 3M Command strips, removable double sided foam tape. |
 |
| Stuck on one of my machines. Yes, I know it is blocking the drive door. |
